Description
The ValFix is the newest, lightest, cheapest spindle wedge on the market and another real BaSt-Ing innovation. With a dead weight of less than 1.4kg and a lifting force of over 15t, it generates more than 1000g (!) Lifting force per 1g of dead weight.
A secret of the ValFix is that it works with a very flat wedge angle. Due to this small angle, it can be constructed particularly easily and still generate high lifting forces.
Grease nipples on both threaded nuts ensure easy maintenance and sufficient lubrication even on long working days.
The ValFix has a very low wedge angle of 10° degrees and therewith high lifting capacity and low weight. Important is that the socket is always completely on the 10mm hex. For smaller trees (below 25cm), there is a risk of touching the breakline of the tree with the tip of the wedge.
The advantages of the ValFix at a glance:
very short
No axial bearing required due to the principle
low weight of 1.4kg
easy lubrication using a grease nipple (no grease spray required)
no weld seam in the spindle
low wear
The ValFix may be operated with a maximum 700 Nm impact wrench.
Tip: With the right choice of impact wrench, it can also be used for the grinder as well as for the depth gauge grinder. e.g. Bosch GDX 18V-200.
Note: Price is excluding GST
Part Number: 91198
